63
D-Link DSL-2740M User Manual
Section 3 - Configuration
Remote Management
Enable Remote
Management:
Remote management allows the DSL-2740M to be configured from
the Internet by a web browser. A password is still required to access
the web management interface.
Remote Admin
Port:
Enter the port number you wish to use to access the DSL-2740M’s
web configuration utility. Example:
http://x.x.x.x:8080
where x.x.x.x
is the Internet IP address of the DSL-2740M and 8080 is the port used
for the web management interface.
Remote Admin
Inbound Filter:
You may select an inbound filter from the drop down menu to restrict
or allow remote administration.
Details:
The current status of the Remote Administration Inbound filter is
displayed here.
REMOTE MANAGEMENT SETTINGS
You may select or deslect the services you wish to be available on the LAN and WAN from
this section of the web configuration utility.
Click the
Apply Settings
button when you are finished.
REMOTE ACCESS CONTROL
Click
Remote Management
on the navigation menu to configure the remote management
options.