background image

12

D-Link DPR-1260 Quick Install Guide

Technical Support

D-Link’s website contains the latest user documentation and 

software updates for D-Link products.

U.S. and Canadian customers can contact D-Link Technical 

Support through our website or by phone.

United States

Telephone 

(877) 453-5465

Twenty four hours a day, seven days a week.

World Wide Web

http://support.dlink.com

E-mail

[email protected]

Canada

Telephone 

(800) 361-5265

Monday through Friday, 7:30am to 9:00pm EST.

World Wide Web

http://support.dlink.ca

E-mail

[email protected]

Version 1.0

Revised 02/14/2006

Copyright  ©2006  D-Link  Corporation/D-Link  Systems,  Inc.  All  rights  reserved.  D-Link  and  the  D-Link  logo  are  registered 

trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property 

of their respective owners. Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput 

will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, 

and network overhead lower actual data throughput rate. Product specifications, size and shape are subject to change without 

notice, and actual product appearance may differ from that depicted on the packaging. Visit www.dlink.com for more details.

Summary of Contents for DPR-1260 - RangeBooster G Multifunction Print...













Reviews: