Copyright@2014 D-Link System, Inc. All Rights Reserved.
28
D-Link Document – User Manual
event log content. Re-assigning the UserHome directory to a different storage pool will wipe the
event log content out as well.
UPS
The
UPS
option provides the status of the UPS (Uninterruptible Power Supply).
This table shows the available options and their descriptions.
Column Name
Description
UPS Type
UPS Type:
None: No UPS or other vendors.
Smart-UPS: APC UPS.
Shutdown battery
level (%)
When below the setting level, the system will shutdown. “0” is disabled
UPS.
Shutdown delay
(s)
If power failure occurs and system power cannot recover after the time
setting, the system will shutdown. “0” is disabled the function.
Shutdown UPS
The status of shutdown UPS:
UPS Type:
ON: When power is gone, UPS will shutdown by itself after the
system shuts down successfully. After the power comes back, UPS
will start working and notify system to boot up.
OFF: Will not.
Battery level (%)
Current power percentage of battery level.
The system will shutdown if either
Shutdown battery level (%)
or
Shutdown delay (s)
reaches the
condition. User should set these values carefully.
Connection
The
Connection
option displays all the connection information for the system.