DIS-M100G-SW
Industrial Gigabit Ethernet to Fiber
Media Converter
Q
uick
I
nstallation
G
uide
Features
Supports 1 port 100/1000Base-T(X) auto-negotiation and auto-MDI/MDI-X
Support Ethernet to SFP port signal conversion
Provided DIP-Switch to set operation speed of SFP port
High reliability and rigid IP-30 housing
DIN-Rail and wall-mount enabled
DIS-M100G-SW
DIS-M100G-SW
DIS-M100G-SW
-
/1000
( )
100/1000
-
,
'
.
,
DIS-M100G-SW
is a cost effective solution for the conversion between
100
Base-T X and
Base X interface it allows you to extend
communication distance by optical fiber.
supports MDI/MDIX auto
detection, so you don t need to use crossover wires.
with wide
operating temperature range from -40
70 and accepts a wide voltage range from
dual 12 ~ 48 VDC power inputs so it is suitable for harsh operating environments
Therefore, the
is reliable media converter and can satisfy most
demand of operating environment.
～
℃
Introduction
Specifications
Model
100/1000 Base-T(X) Port in RJ45
Auto MDI/MDIX
Physical Ports
Technology
Ethernet standards
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow control
IEEE 802.3 ab for 1000Base-T
IEEE 802.3 z for 1000Base-X
LED Indicators
Green: Power LED x 2. (ON) power input on-line / (OFF) power input off-line
Power indicator
Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
100/1000Base-F(X) fiber port
indicator
Power
Input power
Power consumption(Typ.)
Dual 12~48 VDC power input at 4 pin terminal block
3.6 Watts
Overload current protection
Reverse polarity protection
Present
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
Weight (g)
190 g (0.42 lb)
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
Operating Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
FCC Part 15, CISPR (EN55022) class A
EMI
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
EMS
IEC60068-2-27
Shock
IEC60068-2-6
IEC60068-2-32
Vibration
EN60950-1
Safety
Free Fall
Warranty
5 years
-40 to 70 C (-40 to 158 F)
o
o
Connections of Media converter
DIS-M100G-SW
1
LED for Link/Act and Speed indicator :
Green on only : 1000Mbps Link/Act-(ON) Link up / (Flash) Acting /
(OFF) Link down
Green and Amber on : 100Mbps Link/Act-(ON) Link up / (Flash) Acting /
(OFF) Link down
*Note: If amber on only : Link up at 10Mbps is not a valid mode
100/1000Base-T(X) RJ45 port
indicator
DIP-Switch 1/2
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
Power Connection Guide
FrameGround
V-
V+
Power
Supply
12-48 VDC
PWR2
V2+ V2-
G
PWR1
V1+ V1-
Power
Supply
12-48 VDC
V-
V+
DC 12-48V
100/1000Base-X SFP port
1
Fiber Port LNK/ACT LED
SFP 100/1000Base-FX
Fiber Port
1000Base-T LNK/ACT
LED (Green)
100/1000Base-T(X)
LAN Port
10/100Base-T(X)
LNK/ACT LED (Amber)
DIP Switch for Mode
Select
Power LED
DIP-Switch
DIP Switch Function
SFP speed setting to 100Mbps
Description
ON
OFF
Front Panel
SFP speed setting to 1000Mbps
For long distance transmission
Working Status
Ethernet Port Status
100Mbps
100Mbps
1000Mbps
1000Mbps
SFP Fiber Port Status
100Mbps
100Mbps
1000Mbps
1000Mbps
Working status
Valid
Invalid
Valid
Invalid
Accessory
Dust Cover (RJ-45)
2
QIG
8
Screw (M3 X3)
4
Wall-mounted kit
5
25mm DIN-Rail kit
6
4-Pin Terminal block
1
y
r
o
s
s
e
c
c
A
n
o
it
p
i
r
c
s
e
D
l
e
d
o
M
e
m
a
n
l
e
d
o
M
Packing list
Communication Connections
RJ45 (8-pin) to RJ45 (8-Pin) Straight-Through Cable Wiring
RJ45 Plug Pin1
Straight-Through Cable
Switch Port
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
NIC Port
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
3
6
1
2
RJ45 (8-pin) to RJ45 (8-Pin) Cross-Over Cable Wiring
RJ45 Plug Pin1
Cross-Over Cable
Switch Port
(NIC Port)
RJ-45
Connector
Tx+
Tx-
Rx+
Rx-
3
6
1
2
RJ-45
Connector
Rx+
Rx-
Tx+
Tx-
1
2
3
6
Switch Port
(NIC Port)
(Rx+)
(Rx-)
(Tx+)
(Tx-)
(Tx+)
(Tx-)
(Rx+)
(Rx-)
100Base-TX Ethernet Port Connection
RJ45 (8-pin, MDI) Port Pinouts
1
8
Pin
Single
1
2
3
6
Tx+
Tx-
Rx+
Rx-
RJ45 (8-pin, MDI-X) Port Pinouts
1
8
Pin
Single
1
2
3
6
Rx+
Rx-
Tx+
Tx-
Pin
Power Cable with power jack
7
Quick Installation Guide
1
X 1,
2
X 1,
3
X 1,
X 1,
X 8,
DIS-M100G-SW
Gigabit Industrial Unmanaged Media Converter
with 1x100/1000Base-T(X) and 1x100/1000Base-X,
SFP socket
6
4
5
X 2,
7
X 1,
Dust Cover (SFP)
3
X 1
8
LC-Port Pinouts
Tx
Rx
LC-Port to LC-Port Cable Wiring
Rx
Tx
Cable Wiring
x
R
x
T
LC-Port Pinouts
100/1000Base-X SFP Port Connection
Rx
Tx
Q I G
Installation
Din-Rail Install Step
Wall-mounted Install Step
1000Base-T Ethernet Connection
RJ45 (8-pin, MDI) Port Pinouts
1
8
Pin
MDI
1
2
3
4
5
6
7
8
BI_DA+
BI_DA-
BI_DB+
BI_DC+
BI_DC-
BI_DB-
BI_DD+
BI_DD-
RJ45 (8-pin, MDI-X) Port Pinouts
1
8
X
-
I
D
M
n
i
P
n
i
P
1
2
3
4
5
6
7
8
BI_DB+
BI_DB-
BI_DA+
BI_DD+
BI_DD-
BI_DA-
BI_DC+
BI_DC-
Pin
