34
D-Link DIR-X3260 User Manual
Section 3 - Configuration
IPv4 - L2TP
Choose
L2TP
(Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide
you with a username and password. Click
Save
at any time to save the changes you have made on this page.
L2TP Server
Enter the L2TP server IP address provided by your ISP.
Username
Enter the username provided by your ISP.
Password
Enter the password provided by your ISP.
Reconnect Mode
Select either
Always on
,
On Demand
, or
Manual
.
Maximum Idle Time
Configurable when
On Demand
is selected. Enter a maximum
idle time during which the Internet connection is maintained
during inactivity. To disable this feature, select
Always on
as
the reconnect mode.
Advanced Settings...
Address Mode
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
