DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with
3G/LTE Support and 2 USB Ports
User Manual
Configuring via Web-based Interface
AdBlock
On the
Firewall / AdBlock
page, you can enable the function of blocking advertisements which
appear during web surfing.
Figure 199. The
Firewall / AdBlock
page.
To enable the advertisements blocking function, in the
Common Settings
section, move the
Enable
switch to the right.
In the
Path
field, locate a folder to which a file for blocking advertisements will be saved. To do
this, click the
Search
icon (
), go to the needed folder, and click the
SELECT
button.
Then in the
URL
section, click the
ADD
button and in the line displayed, enter a URL address of a
file containing the list of advertising web sites which should be blocked.
Click the
APPLY
button and wait while the file is being loaded to the memory of the USB storage.
Also you can save the file with the list of advertising web sites to the device’s memory. To do this,
move the
Save to the device’s memory
switch to the right, and then click the
APPLY
button.
!
Files saved to the device
’ s memory are updated upon every reboot of the router or its or
firmware update. In case the file is not available at that moment, the list of web sites to be
blocked will not be received.
If you don't want to use a file for blocking advertisements any longer, click the
Delete
icon ( ) in
the line of the URL address of the relevant file. Then click the
APPLY
button.
To disable the advertisements blocking function, move the
Enable
switch to the left and click the
APPLY
button.
Page
261
of 303
