84
D-Link DIR-880L User Manual
Section 3 - Configuration
Enter the
IP Address
as 192.168.0.XX.
Enter the
Subnet Mask
as 255.255.255.0.
Enter the
Default Gateway
as the LAN IP address of your router.*
Enter the
Primary DNS Server
IP address. The IP address of your
router is recommended, or you could use the IP address assigned
by your ISP.
Enter the
Secondary DNS Server
IP address assigned by your ISP,
or you can leave it blank.
Maximum Transmission Unit - by default this field will be set to
Auto
. Select
Manual
if you need to change the MTU for optimal
performance with your ISP.
Click
Save
when you are done.
*
Note:
For information about checking your IP address, refer to
"Networking Basics" on page 167
.
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
Static IP
The factory default IP address for the DIR-880L in Bridge Mode is 192.168.0.50. If you select
Static IP
, assign an
IP Address
as 192.168.0.XX, and a
Subnet Mask
as 255.255.255.0.
