Example (for local access)-‐ h=p://192.168.0.1:8181
Note: If accessing from the Internet, you need to enter the router’s [WAN IP]:[Port]
Example (for remote access) -‐
where your router’s WAN side IP
address is 23.12.134.125, and the access port is 8181.
Step 6: Enter your username and password
Note: By default the username is set to “Admin” with no password.
8. How do I change the 802.11 mode on my router?
Example: If your device only supports 802.11b or 802.11g and it can’t connect to the router
then you can try to change the 802.11 mode to solve the problem. If your devices all use the
same 802.11 standard, you can set an ‘only’ mode to improve performance.
Step 1: Log into your router:
Open your Internet browser and enter h=p://dlinkrouter, h=p://dlinkrouter.local or h=p://
192.168.0.1 into the address bar.
Enter your login informaQon. If you have not changed the default seTngs, the username is
Admin and the password field should be led blank. Click
Login
.
