7. How do I conMigure SharePort Web Access on my router?
Step 1: Insert your USB Flash Drive into your router and check the storage status by clicking
on the Setup tab at the top of the web configuraQon interface’s main page then click Storage
from the menu on the led-‐hand side.
Step 2: Log into your router. Open your Internet browser and enter h=p://dlinkrouter,
h=p://dlinkrouter.local, or h=p://192.168.0.1 into the address bar.
Enter your login informaQon. If you have not changed the default seTngs, the username is
Admin and the password field should be led blank. Click
Login
.
Step 3: Click on the Setup tab at the top of the page and click Storage from the menu on the
led-‐hand side.
Step 4: Check
Enable SharePort Web Access
and make note of the
HTTP Access Port
. This
port will be needed to access the SharePort Web ApplicaQon. By default the port is 8181
Click
Save Se8ngs
Step 5: Open a new web browser and enter [IP address of your router]:[HTTP Access Port]
