D-Link DIR-868L How To Set Up Download Page 1

Page: 1 / 4

Technical Support Setup Procedure

How to Setup DIR-868L Router Access Control.

Step 1:

Connect the LAN cable from the computer to any of 4 ports of the router.

Step 2:

Open a web browser such as Internet Explorer, Mozilla Firefox or Google Chrome. On

the address bar of the web browser type in there the IP Address of the router and then press the
Enter key on your keyboard.

Step 3:

Enter the

Password

(

Wireless Password

)

which show on the sticker label at the base

of the router and click on

Login

to enter the web admin page again.

Step 4:

Click on

ADVANCED

tab, then Click on

ACCESS CONTROL

on the left hand side,

then Click on

Enable Access Control.

Click

Add Policy

Summary of Contents for DIR-868L

Page 1: ...Google Chrome On the address bar of the web browser type in there the IP Address of the router and then press the Enter key on your keyboard Step 3 Enter the Password Wireless Password which show on t...

Page 2: ...hen click next to continue Step 7 Select a schedule from the drop down menu and then click Next to continue Step 8 Enter the following information and then click Next to continue Address Type Select I...

Page 3: ...nable check to enable the rule Name Enter a name for your rule Dest IP Start Enter the starting IP address Dest IP End Enter the ending IP address Protocol Select the protocol Dest Port Start Enter th...

Page 4: ...13 Click the Advanced tab on the top then website filter on the left side of the screen Select the option Deny computers access to ONLY these sites from configure website filter below Type in the webs...