background image

33

D-Link DIR-855L User Manual

Section 3 - Configuration

Select 

PPTP (Username/Password)

 from the drop-down menu.

Advanced Domain Name System

 (

DNS

) services enhances your Internet 

performance by getting you the information and web pages you 

are looking for faster and more reliably. In addition, it improves your 

overall Internet experience by correcting many common typo mistakes 

automatically, taking you where you intended to go and saving you 

valuable time.

Disclaimer:

 D-Link makes no warranty as to the availability, reliability, 

functionality and operation of the Advanced DNS service or its features.

Check to enable true Gigabit routing. This will increase the throughput 

of the WAN-LAN connectivity of the router.

Select 

Static

 if your ISP assigned you the IP address, subnet mask, 

gateway, and DNS server addresses. In most cases, select 

Dynamic

.

Enter the IP address (Static PPTP only).

Enter the Primary and Secondary DNS Server Addresses (Static PPTP 

only).

Enter the Gateway IP Address provided by your ISP.

Enter the Server IP provided by your ISP (optional).

Manual Internet Setup

PPTP

Choose 

PPTP

 (

Point-to-Point-Tunneling Protocol 

) if your ISP uses a PPTP connection. Your ISP will provide you with a username 

and password. This option is typically used for DSL services. 

My Internet 

Connection:

Enable 

Advanced DNS 

Service:

Enable True 

Gigabit Routing 

Connectivity:

Address Mode:

PPTP IP Address:

PPTP Subnet 

Mask:

PPTP Gateway:

PPTP Server IP:

Summary of Contents for DIR-855L



































































































































































Reviews: