manualshive.com logo in svg

D-Link DIR-855L, User Manual, Page: 142 / 162

Share
Download
D-Link DIR-855L User Manual Download Page 142

137

D-Link DIR-855L User Manual

Appendix D - Contacting Technical Support

Contacting Technical Support

U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.

Before you contact technical support, please have the following ready:

 

• Model number of the product (e.g., DIR-855L)

 

• Hardware Revision (located on the label on the bottom of the router (e.g., rev A1))

 

• Serial Number (s/n number located on the label on the bottom of the router). 

You can find software updates and user documentation on the D-Link website as well as frequently asked questions and 

answers to technical issues.

For customers within the United States:

 

Phone Support:

(877) 453-5465

Internet Support:

http://support.dlink.com

 

For customers within Canada:

 

Phone Support:

(800) 361-5265

Internet Support:

http://support.dlink.ca

 

Summary of Contents for DIR-855L



































































































































































Reviews:

No comments