D-Link DIR-820 User Manual Download Page 40

Page: 40 / 210

DIR-820

AC1200 Wave 2 MU-MIMO Wi-Fi Router

User Manual

Configuring via Web-based Interface

CHAPTER 4.

CONFIGURING VIA WEB-BASED

INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the

Initial Configuration

section. On the opened

page, click the

button and wait until the factory default settings are restored.

Figure 28. Restoring the default settings in the Wizard.

If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network

DIR-820

(for operating in the 2.4GHz band) or

DIR-820-

(for operating in the 5GHz band) and click the

NEXT

button.

Figure 29. Checking connection to the wireless network.

Click the

START

button.

Figure 30. Starting the Wizard.

Page

of 210

Summary of Contents for DIR-820



















































































































































































































Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands

D-Link DIR-820, User Manual

Search results

Summary of Contents for DIR-820

Reviews:

Related manuals for DIR-820

Brands by name

Popular brands