DIR-806A
Wireless AC750 Dual Band Router
User Manual
SNMP
On the
Advanced / SNMP
page, you can enable and configure the SNMP agent of the router.
The SNMP agent is a service which sends data on the state and settings of the device where is it
enabled to the SNMP manager (the network management system of your ISP or system
administrator).
Figure 97. The
Advanced / SNMP
page.
In order to enable the SNMP agent, move the
SNMP service status
switch to the right. Then
specify the needed parameters.
Parameter
Description
Configuration
Remote subnet
The IP address of the remote subnet where the SNMP manager is
located.
Hostname
A name of the router for identification in the SNMP manager.
The contact information
for the administrator
Additional information used to contact the administrator of the
router.
System location
Additional information used to locate the router.
After specifying the needed parameters, click the
APPLY
button.
Page
121
of 180
