37
D-Link DIR-615+ User Manual
Section 4 - Configuration
PPPoE IPv6
Select
PPPoE
IPv6
if your ISP provides and requires you to enter a PPPoE
username and password in order to connect to the Internet. Choose Basic
configuration or All Settings.
Basic
MAC address:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
address of your
NIC:
Toggle this switch to clone the MAC address of the device you are
using to access the web UI. Note that no two MAC address within the
same subnet can be the same.
Restore Default
MAC Address:
Click here to restore your router's default MAC address.
Without
authorization:
Enable this setting to connect without a username and password.
This configuration is uncommon and is disabled by default.
Username:
If
Without authorization
is disabled, specify the PPP username
provided by your ISP.
Password:
If
Without authorization
is disabled, specify the PPP password
provided by your ISP.
Service name:
Specify the ISP service name (optional).
Get IPv6:
Choose
Automatically
,
IPv6 by DHCPv6
,
by SLAAC
, or
DHCPv6 PD
according to the type of IPv6 is used by your ISP. The default setting
is Automatically
.
Click
Apply
when you are done.