33
D-Link DIR-615+ User Manual
Section 4 - Configuration
PPPoE
Select
PPPoE
if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet. Choose Basic configuration
or All Settings.
Basic
MAC address:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
address of your
NIC:
Toggle this switch to clone the MAC address of the device you are
using to access the web UI. Note that no two MAC address within the
same subnet can be the same.
Restore Default
MAC Address:
Click here to restore your router's default MAC address.
Without
authorization:
Enable this setting to connect without a username and password.
This configuration is uncommon and is disabled by default.
Username:
If
Without authorization
is disabled, specify the PPP username
provided by your ISP.
Password:
If
Without authorization
is disabled, specify the PPP password
provided by your ISP.
Service name:
Specify the ISP service name (optional).
Click
Apply
when you are done.
