27
D-Link DIR-615+ User Manual
Section 4 - Configuration
Dynamic IPv6
Select
Dynamic IPv6
to obtain IPv6 address information automatically
from your Internet Service Provider (ISP). Choose
Basic
configuration or
All
Settings
.
Basic
MAC address:
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. You can edit that address manually here.
Clone MAC
address of your
NIC:
Toggle this switch to clone the MAC address of the device you are
using to access the web UI. Note that no two MAC address within the
same subnet can be the same.
Restore Default
MAC Address:
Click here to restore your router's default MAC address.
Get IPv6:
Choose
Automatically
,
IPv6 by DHCPv6
,
by SLAAC
,
or
DHCPv6 PD
according to the type of IPv6 is used
by your ISP. The default setting
is Automatically
.
Click
Apply
when you are done.
