DIR-615
Wireless N300 Router
User Manual
Configuring via Web-based Interface
Net
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Net
/ WAN
page, you can create and edit connections used by the router.
By default, the
WAN
connection is configured in the system. It is assigned to the WAN port of the
router. You can edit this connection or delete it.
Figure 85. The
Net / WAN
page.
To create a new connection, click the
Add
button. On the page displayed, specify the relevant
values.
To edit an existing connection, left-click the relevant line in the table. On the page displayed,
change the parameters and click the
Apply
button.
To remove a connection, select the checkbox located to the left of the relevant line in the table and
click the
Delete
button. Also you can remove a connection on the editing page.
To use one of existing WAN connections as a default gateway, select the choice of the
Default
gateway
radio button located in the line corresponding to this connection.
Page
103
of 208
