D-Link DIR-1750 User Manual Download

Page: 43 / 151

D-Link DIR-1750 User Manual

Section 3 - Configuration

Internet - IPv6

In the Settings menu on the bar at the top of the page, click

Internet

to see the Internet configuration options for the IPv4

connection details, then click the

IPv6

link to access the configuration options for the IPv6 connection details.

To configure the IPv4 Internet and network connection details, click the

IPv4

link. Refer to

Internet - IPv4

on page

To configure the VLAN connection details, click the

VLAN

link. Refer to

Internet - VLAN

on page

Click

Save

at any time to save the changes you have made on this page.

For

IPv6 - Auto Detection

refer to page

For

IPv6 - Static IPv6

refer to page

For

IPv6 - Auto Configuration (SLAAC/DHCPv6)

For

For

For

IPv6 - Local Connectivity Only

refer to page

My Internet

Connection is

Choose your Internet connection type from the drop-down

menu. You will be presented with the appropriate options for

your connection type.

Summary of Contents for DIR-1750
























































































































































Search results

Summary of Contents for DIR-1750

Reviews:

Related manuals for DIR-1750

Brands by name

Popular brands

D-Link DIR-1750, User Manual

Search results

Summary of Contents for DIR-1750

Reviews:

Related manuals for DIR-1750

Brands by name

Popular brands