background image

1

1

DI-724P

AirPlus G 2.4GHz Wireless 

Router with Print server

5V DC Power Adapter

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and 

specifications subject to change without notice. 

Before You Begin

1. 

If you purchased this router to share your high-speed Internet connection with 

other computers, you must have either an Ethernet-based Cable or DSL modem 

with an established Internet account from an Internet Service Provider (ISP).

2. 

It’s best to use the same computer that is connected to your modem for configuring 

the DI-724P Multimode Wireless Router. The DI-724P acts as a DHCP server 

and will assign all the necessary IP address information on your network. 

See 

Appendix at the end of this Quick Installation Guide or the Manual on the CD-

ROM for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DI-724P AirPlus G 2.4GHz Wireless 

Router 

CD-ROM (containing Manual and 

Warranty)

Ethernet (Straight Through) Cable

        Using a power supply 

        with a different voltage 

rating will damage and void 

the warranty of this product.

If any of the above items are missing, please contact your reseller.

This product can be set up using 

any current web browser, i.e., 

Internet Explorer 6 or Netscape 

Navigator 6.2.3.

Summary of Contents for DI-724P

















Reviews: