D-Link DI-524 - AirPlus G Wireless Router Owner'S Manual Download Page 33

Page: 33 / 95

Using the Conﬁguration Menu (continued)

Tools > Firmware

You can upgrade the ﬁrmware of the Router here. Make sure the ﬁrmware you want

to use is on the local hard drive of the computer. Click on

Browse

to browse the local

hard drive and locate the ﬁrmware to be used for the update. Please check the D-Link

support site for ﬁrmware updates at http://support.dlink.com. You can download ﬁrmware

upgrades to your hard drive from the D-Link support site.

Firmware Upgrade-

Browse-

Click on the link in this screen to ﬁnd out if there is an up-

dated ﬁrmware; if so, download the new ﬁrmware to your hard

After you have downloaded the new ﬁrmware, click

Browse

this window to locate the ﬁrmware update on your hard drive.

Click

Apply

to complete the ﬁrmware upgrade.

Browse

Summary of Contents for DI-524 - AirPlus G Wireless Router
































































































Search results

Summary of Contents for DI-524 - AirPlus G Wireless Router

Reviews:

Related manuals for DI-524 - AirPlus G Wireless Router

Brands by name

Popular brands

D-Link DI-524 - AirPlus G Wireless Router, Owner'S Manual

Search results

Summary of Contents for DI-524 - AirPlus G Wireless Router

Reviews:

Related manuals for DI-524 - AirPlus G Wireless Router

Brands by name

Popular brands