37
D-Link DHP-W312AV User Manual
Section 3 - Configuration
Configuring WEP
It is recommended to enable encryption on your wireless DHP-W312AV before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web
browser and entering
http://dlinkap.local.
(on the Wi-Fi
Configuration Card) or the IP address of the DHP-W312AV
(
192.168.0.50
). Click on
Setup
and then click
Wireless
Settings
on the left side.
2. Next to Security Mode in the Wireless Security Mode section,
select
WEP Mode
.
3. Next to WEP Encryption, select
64-bit
or
128-bit
encryption.
4. Next to WEP Key 1, enter a WEP key that you create. Make sure
you enter this key exactly on all your wireless devices.
5. Next to Authentication, select
Both
or
Shared Key
.