22
D-Link DHP-W221AV User Manual
Section 3 - Configuration
This section will let you configure your D-Link Powerline settings and information.
PLC Settings
Power Saving:
Network
Name:
Public
Network
Name:
Private
Network
Name:
Network List:
Enable Power saving mode.
You can set the name of your network and to make it either
public or private. Make sure the Network Name of all of the
devices within your Powerline network is the same.
Select this option if you would like to make your Powerline
network public with the default Network Name of
“HomePlugAV”. Since this is a commonly used Network Name,
it is less secure than a private Network Name.
Select this option if you wish to make your Powerline network
more secure by using a private Network Name.
This section provides information such as MAC Address and
data transmission rates on the network devices on your
Powerline network.
