manualshive.com logo in svg

D-Link DGS-3700-12, User Manual

The D-Link DGS-3700-12 is a high-performance Ethernet switch designed for small to medium-sized businesses. Ensure a seamless hardware installation with the comprehensive Hardware Installation Manual available for free download from our website. This user-friendly manual provides detailed instructions and diagrams to assist you in effortlessly setting up your network.

Share
Download
background image

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual 

 

 

 

235 

Application Authentication Settings 

This window is used to configure switch configuration applications (console, Telnet, SSH, web) for login at the user 
level and at the administration level (Enable Admin) utilizing a previously configured method list.  

To view this window, click 

Security > Access Authentication Control > Application Authentication Settings

, as 

shown below: 

 

 Figure 8- 47 Application Authentication Settings window 

The following parameters can be set: 

Parameter                     Description 

Application 

Lists the configuration applications on the Switch. The user may configure the Login Method 
List and Enable Method List for authentication for users utilizing the Console (Command Line 
Interface) application, the Telnet application, SSH, and the WEB (HTTP) application. 

Login Method List 

Using the pull-down menu, configure an application for normal login on the user level, utilizing 
a previously configured method list. The user may use the default Method List or other 
Method List configured by the user. See the 

Login Method Lists 

window, in this section, for 

more information. 

Enable Method List 

Using the pull-down menu, configure an application for normal login on the user level, utilizing 
a previously configured method list. The user may use the default Method List or other 
Method List configured by the user. See the 

Enable Method Lists

 window, in this section, for 

more information 

Click 

Apply

 to implement changes made. 

Authentication Server Group Settings 

This window will allow users to set up Authentication Server Groups on the Switch. A server group is a technique used 
to group TACACS/XTACACS//RADIUS server hosts into user-defined categories for authentication using 
method lists. The user may define the type of server group by protocol or by previously defined server group. The 
Switch has three built-in Authentication Server Groups that cannot be removed but can be modified. Up to eight 
authentication server hosts may be added to any particular group. 

To view this window, click 

Security > Access Authentication Control > Authentication Server Group Settings

,

 

as 

shown below: 

Summary of Contents for DGS-3700-12













































































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3700-12

Clavister NetWall W20A Getting Started Manual preview
NetWall W20A
Brand: Clavister Pages: 89
Vivotek FE9181-H Quick Installation Manual preview
FE9181-H
Brand: Vivotek Pages: 170
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
UfiSpace S9600-64X Hardware Installation Manual preview
S9600-64X
Brand: UfiSpace Pages: 35
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
ACTi GNR-310 Quick Installation Manual preview
GNR-310
Brand: ACTi Pages: 12
BHU NETWORKS BXM2 User Manual preview
BXM2
Brand: BHU NETWORKS Pages: 75
Billion BiPAC 7301VGP User Manual preview
BiPAC 7301VGP
Brand: Billion Pages: 120
Swann NVRx-7300 series Quick Start Manual preview
NVRx-7300 series
Brand: Swann Pages: 9
Dahua NVRPRO User Manual preview
NVRPRO
Brand: Dahua Pages: 113
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Brand: Paradyne Pages: 28
Cyclades AlterPath Manager 2500 Installation, Configuration And User Manual preview
AlterPath Manager 2500
Brand: Cyclades Pages: 368
Toto Link ND300V2 Manual preview
ND300V2
Brand: Toto Link Pages: 57
Black Box LGB2003A User Manual preview
LGB2003A
Brand: Black Box Pages: 62
DayTronic PC-HSICA Instruction Manual preview
PC-HSICA
Brand: DayTronic Pages: 13
Axis M31-L SERIES Installation Manual preview
M31-L SERIES
Brand: Axis Pages: 30
Accusys ACD-76300 Quick Installation Manual preview
ACD-76300
Brand: Accusys Pages: 12

Brands by name

Popular brands

Load more brands