DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet User Manual
118
Figure 4- 67 IGMP Snooping Multicast VLAN Settings (Edit) window
The following fields can be set:
Parameter Description
State
Toggle the State between
Disabled
and
Enabled
.
Replace Source IP
Enter the IP address to replace the source IP address.
Remap Priority
Use the drop-down menu to select a remap priority value between
0
and
7,
or select
None
.
Alternatively, tick the Replace Priority check box.
Untagged Member
Ports
Tick the desired untagged member ports, or click either
Select All
or
Clear All
.
Tagged Member
Ports
Tick the desired tagged member ports, or click either
Select All
or
Clear All
.
Untagged Source
ports
Tick the desired untagged source ports, or click either
Select All
or
Clear All
.
Tagged Source
Ports
Tick the desired tagged source ports, or click either
Select All
or
Clear All
.
Click
Apply
to implement changes made.
MLD Multicast Group Profile Settings
This window allows the user to create MLD multicast group profiles and specify multicast address lists on the Switch.
To view this window, click
L2 Features > L2 Multicast Control > Multicast VLAN > MLD Multicast Group Profile
Settings
, as shown below:
Figure 4- 68 MLD Multicast Group Profile Settings window
To configure the group list once a profile has been created, click on the hyperlinked
Group List
to reveal the following
window: