DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
419
The fields that can be configured are described below:
Parameter
Description
Unit
Select the Switch unit that will be used for this configuration here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Instance
Enter the instance index number if multiple samplers are associated with one
interface. The valid range is from 1 to 65535.
Receiver
Enter the receiver index value for this poller here. This value must be between
1 and 4.
Interval
Enter the maximum number of seconds between successive polling samples.
This value must be between 0 and 120 seconds. Entering 0 will disable this
feature. By default this value is 0.
Click the
Apply
button to accept the changes made.
Click the
Delete
button to remove the specified entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Device Environment
The device environment feature displays the Switch internal temperature status.
To view the following window, click
Monitoring > Device Environment
, as shown below:
Figure 11-21 Device Environment Window
Summary of Contents for DGS-3130 Series
Page 1: ......
