DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
369
The fields that can be configured are described below:
Parameter
Description
IP SSH Server State
Select to enable or disable the global SSH server state.
IP SSH Service Port
Enter the SSH service port number used here. This value must be between 1
and 65535. By default, this number is 22.
Authentication Timeout
Enter the authentication timeout value here. This value must be between 30
and 600 seconds. By default, this value is 120 seconds.
Authentication Retries
Enter the authentication retries value here. This value must be between 1 and
32. By default, this value is 3.
Click the
Apply
button to accept the changes made.
Host Key
This window is used to view and generate the SSH host key.
To view the following window, click
Security > SSH > Host Key
, as shown below:
Figure 9-91 Host Key Window
The fields that can be configured in
Host Key Management
are described below:
Parameter
Description
Crypto Key Type
Select the crypto key type used here. Options to choose from are the Rivest
Shamir Adleman (
RSA
) key type and the Digital Signature Algorithm (
DSA
) key
type.
Key Modulus
Select the key modulus value here. Options to choose from are
360, 512, 768,
1024
, and
2048
bit.
Click the
Generate
button to generate a host key based on the selections made.
Click the
Delete
button to remove a host key based on the selections made.
The fields that can be configured in
Host Key
are described below:
Parameter
Description
Crypto Key Type
Select the crypto key type used here. Options to choose from are the Rivest
Shamir Adleman (
RSA
) key type and the Digital Signature Algorithm (
DSA
) key
type.
After clicking the
Generate
button, the following window will appear:
Summary of Contents for DGS-3130 Series
Page 1: ......
