DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
14
Figure 3-9 Jumbo Frame Window
The fields that can be configured are described below:
Parameter
Description
Unit
Select the stacking unit ID of the Switch that will be configured here.
From Port - To Port
Select the appropriate port range used for the configuration here.
Maximum Receive Frame
Size
Enter the maximum receive frame size value here. This value must be between
64 and 12288 bytes. By default, this value is 1536 bytes.
Click the
Apply
button to accept the changes made.
Interface Description
This window is used to display the status, administrative status, and description of each port on the Switch.
To view the following window, click
System > Interface Description
, as shown below:
Figure 3-10 Interface Description Window
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
Summary of Contents for DGS-3130 Series
Page 1: ......
