DGS-1510/ME Series Metro Ethernet Switch CLI Reference Guide
36
Chapter 4
802.1X Command List
enable 802.1x
disable 802.1x
create 802.1x user
<username 15>
delete 802.1x user
<username 15>
show 802.1x user
config 802.1x auth_protocol
[local | radius_eap]
config 802.1x fwd_pdu system
[enable | disable]
config 802.1x fwd_pdu ports
[<portlist> | all] [enable | disable]
config 802.1x authorization attributes
radius
[enable | disable]
show 802.1x
{[auth_state | auth_configuration] ports {<portlist>}}
config 802.1x capability ports
[<portlist> | all] [authenticator | none]
config 802.1x max_users
[<value 1–448> | no_limit]
config 802.1x auth_parameter ports
[<portlist> | all] [default | {direction [both | in] | port_control [force_unauth |
auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-65535> |
server_timeout <sec 1-65535> | max_req <value 1-10> | reauth_period <sec 1-65535> | max_users [<value
1-448> | no_limit] | enable_reauth [enable | disable]}(1)]
config 802.1x auth_mode
[port_based | mac_based]
config 802.1x init
[port_based ports [<portlist> | all] | mac_based ports [<portlist> | all] {mac_address
<macaddr>}]
config 802.1x reauth
[port_based ports [<portlist> | all] | mac_based ports [<portlist> | all] {mac_address
<macaddr>}]
create 802.1x guest_vlan
{<vlan_name 32>}
delete 802.1x guest_vlan
{<vlan_name 32>}
config 802.1x guest_vlan ports
[<portlist> | all] state [enable | disable]
show 802.1x guest_vlan
4-1
enable 802.1x
Description
This command is used to enable the 802.1X function.
Format
enable 802.1x
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Summary of Contents for DGS-1510/ME Series
Page 1: ......
