DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
31
SNTP Settings
The Simple Network Time Protocol (SNTP) is a protocol for synchronizing computer clocks through the Internet. It
provides comprehensive mechanisms to access national time and frequency dissemination services, coordinate the
SNTP subnet of servers and clients, and adjust the system clock on each participant.
This window is used to display and configure the SNTP settings for the Switch.
To view the following window, click
System > Time and SNTP > SNTP Settings
, as shown below:
Figure 3-24 SNTP Settings Window
The fields that can be configured in
SNTP Global Settings
are described below:
Parameter
Description
SNTP State
Select this option to enable or disable SNTP.
Poll Interval
Enter the synchronizing interval in seconds. The value is from 30 to 99999
seconds. The default interval is 720 seconds.
Click the
Apply
button to accept the changes made.
The fields that can be configured in
SNTP Server Settings
are described below:
Parameter
Description
IPv4 Address
Enter the IPv4 address of the SNTP server that provides the SNTP reference.
IPv6 Address
Enter the IPv6 address of the SNTP server that provides the SNTP reference.
Click the
Add
button to add the SNTP server.
Click the
Delete
button to remove the specified entry.
Summary of Contents for DGS-1250 Series
Page 1: ......
