DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide
14
Click the
Apply
button to accept the changes made.
The fields that can be configured in
Environment Temperature Threshold Settings
are described below:
Parameter
Description
High Threshold
Enter the high threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the
Default
check box to return to the
default value.
Low Threshold
Enter the low threshold value of the warning temperature setting. The range is
from -100 to 200 degrees Celsius. Tick the
Default
check box to return to the
default value.
Click the
Apply
button to accept the changes made.
Port Configuration
Port Settings
This window is used to display and configure the Switch’s port settings.
To view the following window, click
System > Port Configuration > Port Settings
, as shown below:
Figure 3-4 Port Settings Window
The fields that can be configured are described below:
Parameter
Description
From Port - To Port
Select the appropriate port range used for the configuration here.
State
Select to enable or disable the physical port state here.
MDIX
Select the Medium Dependent Interface Crossover (MDIX) option here. Options to
choose from are:
•
Auto
- Select this option for auto-sensing of the optimal type of cabling.
•
Normal
- Select this option for normal cabling. If this option is selected, the
port is in the MDIX mode and can be connected to a PC NIC using a straight-
through cable or a port (in the MDI mode) on another Switch through a
crossover cable.
Summary of Contents for DGS-1250 Series
Page 1: ......
