4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
138
PoE > PoE System Settings (DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME only)
This PoE System Settings page will display the PoE status including
System Budget Power
,
Support Total
Power
,
Remainder Power
, and
The ratio of system power supply
.
Figure 4.213 – PoE > PoE System Settings
System Power Threshold:
Manually configure the system power budget 7.1 ~ 193.0 watts for DGS-1210-
28P/ME.
System Setting Disconnect Method:
Defines the method used to deny power to a port once the threshold
is reached. The possible fields are:
Deny next port:
When the power budget is exceeded, the next port attempting to power up is
denied, regardless of the port priority.
Deny low priority port:
The port with the lower priority will be shut down to allow the higher priority
port to power up.
Click
Apply
to make the configurations take effect.
System Power Status:
Displays the system power status of device.
System Budget Power:
Displays the total PoE power budget of this switch.
Support Total Power:
Displays the current used power of the switch.
Remainder Power:
Displays the spare power of the switch.
The ratio of system power supplied:
Displays the percentage of system power supplied of the
switch.
Time-Based PoE > Time Range Settings
The Time Profile page allows users to configure the time profile settings of the device
Figure 4.214 – Time-Based PoE > Time Range Settings
Range Name:
Specifies the range name.
Date:
Specifies the From Day and To Day.
Hours(HH MM):
Specifies the Start Time and End Time.
Weekdays:
Specifies the work day.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...
