DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
223
29
RMON COMMANDS
The RMON commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
Parameter
enable rmon
disable rmon
create rmon alarm
<alarm_index 1-65535> <OID_variable 255> <interval 1-2147482647> [absolute
| delta] rising-threshold <value 0-2147483647> <rising_event_index 1-65535>
falling-threshold <value 0-2147483647> <falling_event_index 1-65535> {[owner
<owner_string 32>]}
delete rmon alarm
<alarm_index 1-65535>
show rmon alarm
{events | history {<hist_index 1-65535> | overview}}
create rmon collection
stats
<stats_index 1-65535> port <ifindex> owner <owner_string 32>
delete rmon collection
stats
<stats_index 1-65535>
create rmon collection
history
<hist_index 1-65535> port <ifindex> {buckets <buckets_req 1-50> interval
<interval 1-3600> owner <owner_string 32>}
delete rmon collection
history
<hist_index 1-65535>
create rmon event
<event_index 1-65535> description <DGSc_string 128> {[log | owner
<owner_string 32> | trap <community_string 32>]}
delete rmon event
<event_index 1-65535>
show rmon
{event | history {<hist_index 1-65535> | overview}}
show rmon statistics
{<stats_index 1-65535>}
Each command is listed in detail, as follows:
enable rmon
Purpose
To enable remote monitoring (RMON) status for the SNMP function.
Syntax
enable rmon
Description
The
enable rmon
command enables remote monitoring (RMON)
status for the SNMP function on the Switch.
Parameters
None.
Restrictions
Only Administrator or operator-level users can issue this command.
Example usage:
To enable the RMON feature on the Switch:
