DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
215
priority value an untagged, incoming packet is assigned before being
forwarded to its destination.
Parameters
<portlist>
− A port or range of ports to be configured.
all
− Specifies that the config 802.1p default_priority command
applies to all ports on the Switch.
<priority 0-7>
− The 802.1p priority value that an untagged, incoming
packet is granted before being forwarded to its destination.
Restrictions
Only administrator or operator level users can issue this command.
Example usage:
To configure 802.1p default priority on the Switch:
DGS-1210-28MP/ME:5# config 802.1p default_priority all 4
Command: config 802.1p default_priority all 4
Success.
DGS-1210-28MP/ME:5#
show 802.1p default_priority
Purpose
To display the currently configured 802.1p priority value that is
assigned to an incoming, untagged packet before being forwarded to
its destination.
Syntax
show 802.1p default_priority {<portlist>}
Description
The
show 802.1p default_priority
command displays the currently
configured 802.1p priority value that is assigned to an incoming,
untagged packet before being forwarded to its destination.
Parameters
<portlist>
− A port or range of ports to be displayed.
Restrictions
None.
Example usage:
To display the current port 1-5 802.1p default priority configuration on the Switch:
DGS-1210-28MP/ME:5# show 802.1p default_priority 1-5
Command: show 802.1p default_priority 1-5
Port Default Priority Effective Priority
----- ---------------------- -------------------------
1 0 4
2 0 4
3 0 4
4 0 4
5 0 4
DGS-1210-28MP/ME:5#
config scheduling_mechanism
Purpose
To configure the scheduling mechanism for the QoS function.
Syntax
config scheduling_mechanism [strict | wrr | 1st7wrr | 2st6wrr]
