6 Command Line Interface
D-Link Smart Managed Switch User Manual
146
DHCPv6 Client State : Disabled
DGS-1210-52MP>
show switch
Purpose
To display the information of the Switch.
Syntax
show switch
Description
The
show switch command
displays the status of the switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the switch information:
DGS-1210-52MP> show switch
System name :
System Contact :
System Location :
System up time : 0 days, 0 hrs, 12 min, 9 secs
System Time : 01/01/2016 00:10:30
System hardware version : F1
System firmware version : 6.00.005
System boot version : 1.00.003
System serial number : QBDES12105200
MAC Address : 4A-6F-6E-01-01-01
DGS-1210-52MP>
show route
Purpose
To display the routing status of IPv4 or IPv6 on the Switch.
Syntax
show route {ipv4 | ipv6}
Description
The
show route
command displays the routing status of IPv4 or
IPv6 on the Switch.
Parameters
None.
Restrictions
None.
Example usage:
To display the IPv4 & IPv6 route status on the Switch:
DGS-1210-52MP> show route ipv4
IPv4 Static Route State : Disable
