D-Link DGS-1100-06/ME, Cli Reference Manual

Page: 55 / 275

DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
43
Description The
delete snmp user
command removes an SNMP user from its
SNMP group and then deletes the associated SNMP group.
Parameters <username 32>
− A string of up to 32 alphanumeric characters that
identifies the SNMP user to be deleted.
Restrictions Only administrator or operate-level users can issue this command.
Example usage:
To delete a previously created SNMP user on the Switch:
DGS-1100-06/ME:5#delete snmp user dlink v3
Command: delete snmp user dlink v3
Success!
DGS-1100-06/ME:5#
show snmp user
Purpose To display information about each SNMP username in the SNMP
group username table.
Syntax
show snmp user
Description The
show snmp user
command displays information about each
SNMP username in the SNMP group username table.
Parameters None.
Restrictions None.
Example usage:
To display the SNMP users currently configured on the Switch:
DGS-1100-06/ME:5#show snmp user
Command: show snmp user
Username Group Name SNMP Version Auth-Protocol PrivProtocol
-------------- ---------------- ---------------- -------------------- ---------------
ReadOnly ReadOnly V1 None None
ReadOnly ReadOnly V2 None None
ReadWrite ReadWrite V1 None None
ReadWrite ReadWrite V2 None None
Total Entries: 4
DGS-1100-06/ME:5#
create snmp view
Purpose To assign views to community strings to limit which MIB objects an
SNMP manager can access.
Syntax
create snmp view <view_name 32> <oid 32> <oid_mask 32