D-Link DFL-500 Page 112 User Manual Download

Page: 112 / 140

To configure the DFL-500 for automatic attack database updates, see

Automatic antivirus and attack database

updates

.You can also manually update your attack database by going to

System > Update

and selecting Update

Now.

Download the latest attack database from the D-Link update website at http://www.Dlink.com and copy it
to the computer that you use to connect to the DFL-500 web-based manager.

Start the DFL-500 web-based manager and go to

System > Status

To the right of the Attack Database Version, select Database Update

Enter the path and filename for the attack database file, or select Browse and locate the file.

Select OK to upload the attack database to the DFL-500.
The DFL-500 uploads the attack database. This takes about 1 minute.

Go to

System > Status

to confirm that the attack Database Version information has been updated.

Displaying the DFL-500 serial number

Go to

System > Status

The Serial number is displayed in the Status window. The serial number is specific to your DFL-500 and
does not change with firmware upgrades.

Backing up system settings

This procedure does not back-up the Web content and URL filtering lists. To back-up these lists see

Downloading

the banned word list

and

Downloading the URL block list

You can back-up system settings by downloading them to a text file on the management computer:

Go to

System > Status

Select System Settings Download.

Select Download System Settings.

Type in a name and location for the file.
The system settings file is downloaded to the management computer.

Select Return to go back to the Status page.

Restoring system settings

This procedure does not restore the Web content and URL filtering lists. To restore these lists see

Uploading a URL

block list

and

Creating the banned word list using a text editor

You can restore system settings by uploading a previously downloaded system settings text file:

Go to

System > Status

Select System Settings Upload.

Enter the path and filename of the system settings file, or select Browse and locate the file.

Select OK to upload the system settings file to the DFL-500.
The DFL-500 uploads the file and restarts, loading the new system settings.

Reconnect to the web-based manager and review your configuration to confirm that the uploaded system
settings have taken effect.

DFL-500 User Manual

112

Summary of Contents for DFL-500













































































































































Search results

Summary of Contents for DFL-500

Reviews:

Related manuals for DFL-500

Brands by name

Popular brands

D-Link DFL-500, User Manual

Search results

Summary of Contents for DFL-500

Reviews:

Related manuals for DFL-500

Brands by name

Popular brands