D-Link DES-7200, Cli Reference Manual, Page: 926 / 1180

Chapter 45 AAA Configuration Commands DES-7200 CLI Reference Guide
45-22
commands
aaa new-model Enable the AAA security service.
aaa accouting
commands
Define the method list of AAA
accouting command.
45.3.7 accounting exec
Use this command to apply the exec accouting method list to the specified terminal lines in
the line configuration mode. The no form of this command is used to disable the exec
accounting function.
accounting exec { default | list-name }
no accounting exec
Parameter
description
Parameter Description
default Use the default method of Exec accouting.
list-name Use a defined Exec accouting method list.
Default Disabled.
Command
mode Line configuration mode.
Usage
guidelines
Once the default exec accouting method list has been configured, it is
applied to all terminals automatically. Once the non-default exec
accounting method list has been configured, it is applied to the line
instead of the default method list. If you attempt to apply a undefined
method list, a warning message will prompt that the exec accounting
in this line is ineffective till the exec accounting command method list
is defined.
Examples
The following example configures the exec accounting method list
with name exec-1, uses the RADIUS server. If the security server
does not response, it does not perform accounting. After
configuration, the exec accounting is applied to VTY 0-4 lines:
DES-7210(config)# aaa accounting exec exec-1 group radius none
DES-7210(config)# line vty 0 4
DES-7210(config-line)# accounting exec exec-1