D-Link DES-7200, Cli Reference Manual, Page: 280 / 1180

Chapter 23 DHCP Configuration Commands DES-7200 CLI Reference Guide
23-4
ip dhcp pool
Define the name of the DHCP address pool
and enter into the DHCP address pool
configuration mode.
23.1.3 client-name
Use this command to define the name of the DHCP client in the DHPC address pool
configuration mode.The no form of this command is used to delete the name of the DHCP
client.
client-name client-name
no client-name
Parameter
description
Parameter Description
client-name
Name of DHCP client, a set of standards-based
ASCII characters.The name should not include
the suffix domain name. For instance, you can
define the name of the DHCP client as river, not
river.i-net.com.cn.
Default No client name is defined.
Command
mode DHCP address pool configuration mode.
Usage
guidelines
This command can be used to define the name of the DHCP client
only when the DHCP is defined by manual binding. This name should
not include the suffix domain name.
Examples
The configuration example below defines a string river as the name of
the client.
client-name river
Related
commands
Command Description
host
Define the IP address and network mask, which
is used to configure the DHCP manual binding.
ip dhcp pool
Define the name of the DHCP address pool and
enter into the DHCP address pool configuration
mode.