D-Link DES-7200, Cli Reference Manual

Page: 1039 / 1180

DES-7200 CLI Reference Guide Chapter 54 ACL Configuration Commands
54-31
no mac access-group { id | name }{ in | out }
Parameter
description
Parameter Description
id
ID of the MAC ACL (700 to 799)
name
Name of the MAC ACL
in
Filter the incoming packets of the interface
out
Filter the outgoing packets of the interface
Default
configuration No ACL is applied on the interface.
Command
mode Interface configuration mode.
Usage
guidelines N/A.
Examples
The following example shows how to apply the access-list
accept _ 00d0f8xxxxxx only to Gigabit interface 1:
DES-7210(config)# interface GigaEthernet 1/1
DES-7210(config-if)# mac access-group
accept__00d0f8xxxxxx_only in
Related
commands
Command Description
show
access-group
Show the ACL configuration.
Platform
description The software version must be R10.0 and higher.
54.1.13 expert access-group
Use this command to apply the specified expert ACL on the specified interface. Use the no
form of the command to remove the application.
expert access-group { id | name } { in | out }
no expert access-group { id | name } { in | out }