D-Link DES-3326S - Switch - Stackable, Command Line Interface Reference Manual

Page: 107 / 354

DES-3326SR Layer 3 Fast Ethernet Switch CLI Reference Manual
Network Monitoring Commands 107
clear counters
Purpose Used to clear the switch ’ s statistics
counters.
Syntax clear counters {ports <portlist>}
Description This command will clear the counters used
by the switch to compile statistics.
Parameters
<portlist>
−
Specifies a range of ports to be
configured. The port list is specified by
listing the lowest switch number and the
beginning port number on that switch,
separated by a colon. Then highest switch
number, and the highest port number of the
range (also separated by a colon) are
specified. The beginning and end of the port
list range are separated by a dash. For
example, 1:3 would specify switch number
1, port 3. 2:4 specifies switch number 2,
port 4. 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4
−
in numerical order.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To clear the counters:
DES-3326SR:4#clear counters ports 2:7-2:9
Command: clear counters ports 2:7-2:9
Success.