DES-1210-08P Firmware Release Notes
3
tftp://ip-address/filename}
When completing firmware upgrade, the following messages will pop up.
Device will reboot after firmware upgraded successfully
Image upgraded successfully
4. Execute the following command to check the firmware version and switch’s information.
Command
Function
show switch
Display the information
of current
firmware and boot version.
Example:
1.
DES-1210-08P:
Command: download firmware_fromTFTP tftp://10.90.90.91 DGS-1210-48 A1
1_00_011.hex
Device will reboot after firmware upgraded successfully
Image upgraded successfully
2.
DES-1210-08P:
Command: show switch
DGS-1210-48> show switch
System name :
System Contact :
System Location :
System up time : 0 days, 1 hrs, 8 min, 36 secs
System Time : 01/01/2009 01:58:42
System hardware version : A1
System firmware version : 2.00.011
System boot version : 1.00.004
System Protocol version : 2.001.004
System serial number : LABDES1252008
MAC Address : 00-01-02-03-04-05
Upgrade using Web-UI
1.
Connect a workstation installed with java SE runtime environment to any switch port of the
device.
2.
Open the web browser from the workstation and enter the IP address of the switch. The
switch’s default IP address is 10.90.90.90.
3.
Enter administrator’s password when prompted. The password is
admin
by default.
4.
To update switch's firmware or configuration file, select
Tools > Firmware Backup &
Upgrade
from the banner
.
v
