Specifications
Standard
IEEE 802.3 10BASE-T, 10BASE-FL
10BASE-T RJ-45 Connector
One RJ-45 switch is provided for selecting the type of RJ-
45 connector as follows:
RJ-45 Switch RJ-45 Type
X position
MDI-X
II position
MDI
RJ-45 Pin MDI-X type
MDI type
1
Rx+
Tx+
2
RX-
Tx-
3
Tx+
Rx+
6
Tx-
Rx-
It allows you to make all UTP connections using common
straight-through UTP.
10BASE-T UTP Cable
Cable type: Category 3, 4 or 5
Maximum cable distance: 100 meters (328 feet)
Fiber Optic Connectors
Two connectors are provided for fiber optic cable
connection. One is labeled "Tx" for transmitting operation.
The other is labeled "Rx" for receiving operation.
Model
Converter/T Converter/C Converter/S
Wavelength
850nm
850nm
1300nm
Fiber mode
Multimode
Multimode
Single mode
Connector
ST type
SC type
ST type
Fiber cable*
1
62.5/125
µ
m
62.5/125
µ
m
8/125
µ
m
Cable length
2000 meters
2000 meters
14K meters
Fiber cable*
1
: Recommended fiber cable
LEDs
Unit LED
Power
Port LEDs
UTP Link, UTP Rx, Fiber Link, Fiber Rx
(Rx: receiving status)
Environment
Temperature 0
o
- 40
o
C
Humidity
10-90% non condensing
Dimension
74mm x 51mm x 20mm
Power
+12V / 500mA minimum
DC plug type:
Installation
1. Install the media converter with the DC power adapter
provided. ( +12VDC, 500mA)
2. Connect the power adapter cable to the media con-
verter before connecting the adapter to the AC outlet.
3. Do not connect more than two media converters in
series.
General Description
The 10BASE-T/10BASE-FL Ethernet media converter is
designed to be a connection interface between a 10BASE-T
Ethernet UTP cable and 10BASE-FL fiber cable with no
increasing on the hop count in the network. It features a
RJ-45 connector and a pair of fiber optic connectors. This
guide covers the following three models to support
different fiber cables as follows:
Converter/T
UTP to multimode fiber with ST connectors
Converter/C
UTP to multimode fiber with SC connectors
Converter/S
UTP to single mode fiber with ST connectors
Installation Guide
10BASE-T/10BASE-FL
Ethernet Media Converters
