Note: Enabling settings will block your ActiveX Installation,
Note: If you have antivirus or firewall programs running, make sure they are not blocking
ActiveX controls from being downloaded or running. Make sure that you have administrative
rights before installing the ActiveX controls.
12.
How do I access my mydlink camera remotely?
In order to view your mydlink camera remotely through the mydlink portal or using the
mydlink app, you must first register your camera to a mydlink account. This is done while
running the installation CD or camera installer which came supplied with your camera.
https://www.mydlink.com/support
to download the installer for your camera.
Using mydlink Web Portal:
Step 1: Log in to your mydlink account at
Summary of Contents for DCS-942L
