40
D-Link DCS-933L User Manual
40
Section 3 - Configuration
System
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local
Hard Drive:
Load From
Local Hard
Drive:
Restore
To Factory
Default:
Reboot The
Device:
Click the
Save Configuration
button to save the current camera
configuration to your local PC.
To load a previously saved configuration, click the
Browse...
button, select your saved configuration file, then click the
Restore
Configuration From File
button.
Click the
Restore Factory Defaults
button to reset all settings back to
the factory defaults. Please note that this will erase any changes you
have made to the settings of the camera.
Click the
Reboot the Device
button to reboot the camera.