30
D-Link DCS-6410 User Manual
Section 3 - Configuration
LAN Settings:
DHCP:
Static IP Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP port
forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server running
on your network and would like a dynamic IP address to be
updated to your camera automatically.
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera.
A static IP address will aid you in accessing your camera in
the future.
The fixed IP address.
The default value is “255.255.255.0.” Used to determine if
the destination is in the same subnet.
The gateway used to forward frames to destinations in a
different subnet. Invalid gateway settings may cause the
failure of transmissions to a different subnet.
Primary domain name server that translates names to IP
addresses.
Secondary domain name server to backup the primary
DNS.
Enable this setting to allow your camera to be configured as an
UPnP device in your network.
Enable this setting to allow your camera to add port forwarding entries into the router automatically.
Network Setup
Use this section to configure the network connections for you camera. All relevant information must be entered
accurately.
