manualshive.com logo in svg

D-Link DCS-5211L, User Manual, Page: 6 / 78

Share
Download
D-Link DCS-5211L User Manual Download Page 6

2

D-Link DCS-5211L/DCS-5222L User Manual

Section 1 - Product Overview

System Requirements

Network Requirements

• Wired (10/100/1000 Fast Ethernet) network

• Wireless 802.11g/n/b network (DCS-5222L only)

CD Setup Wizard 

Requirements

• An Internet connection

• A router connected to your broadband modem

Computer with the following:

• A PC with a wired connection to your router

• Windows

®

 XP(32/64bit), Windows

®

 7(32/64bit), 

Windows

®

 Vista(32/64bit), MAC OS

®

 X 10.5 

or above

Web-based Configuration 

Utility Requirements

Computer with the following:

• Windows

®

 based operating system 

• An installed Ethernet adapter

Browser Requirements:

• Internet Explorer 7 or higher

• Firefox 6.5 or higher

• Safari 4 or higher

• Chrome 8 or higher 

Windows

®

 Users:

 Make sure you have the 

latest version of Java installed. V

isit www.

java.com to 

download the latest version.

myDlink Website 

Requirements 

• Subscription with an Internet Service Provide (ISP) 

with 256 Kbps minimum for remote video viewing

• Computer with: Microsoft Internet Explorer 

6 or higher with ActiveX Support

Summary of Contents for DCS-5211L















































































Reviews:

No comments