61
D-Link DCS-5029L User Manual
61
Section 4 - Configuration
HTTPS
This page allows you to install and activate an HTTPS certificate for secure access to your camera.
Enable HTTPS
Secure Connection:
Create Certificate
Method:
Create certificate:
Certificate
Information:
Check the box to enable the HTTPS (Hypertext Transfer Protocol Secure)
service.
Choose the way the certificate should be created. Three options are
available:
1. Create a self-signed certificate automatically
2. Create a self-signed certificate manually
3. Create a certificate request and install
Click
Create
to create the certificate.
Displays the
Status
and other details about the certificate.
Note:
The certificate cannot be removed while the HTTPS is still enabled.
To remove the certificate, you must first uncheck
Enable HTTPS secure
connection
and then click
Remove
.
Click
Save Settings
.
