60
D-Link DCS-5029L User Manual
60
Section 4 - Configuration
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be removed for increased sensitivity in low-light environments.
(The ICR filter blocks IR light when it is inserted.)
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync with ICR:
Schedule:
Click
Automatic,
and the Day/Night mode is set automatically. Generally,
the camera uses Day mode and switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Click
Schedule mode
, and then set up the Day/Night mode using a
schedule. Select the starting time (
From
) for Day Mode, and the ending
time (
To
) for return to Night Mode.
Select from the options below to enable or disable the IR (infrared) light
according to your preferences. This setting provides additional controls
depending on your specific application.
Click
Off
, and the IR light will always be off.
Click
On
, and the IR light will always be on.
Click
Sync with ICR
to synchronize your IR LEDs with the ICR filter. IR lights
will come on when the ICR filter is removed.
Click
Schedule,
and the IR light will turn on or off according to the schedule
that you specify. Select a starting time (
From
) and ending time (
To
) from
the drop-down menu.
Click
Save Settings
.
