33
D-Link DCS-4602EV User Manual
Section 3: Configuration
Settings
Network Settings
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. Please note that PPPoE
must be disabled to make any changes on this page; refer to
for more details. After making any changes, click the
Save
button to save your changes.
DHCP:
Static IP Client:
IP Address:
Subnet Mask:
Default
Gateway:
Primary DNS:
Secondary
DNS:
Select this connection if you have a DHCP server running on your network
and would like your camera to obtain an IP address automatically.
If you choose DHCP, you do not need to fill out the IP address settings.
You may obtain a static or fixed IP address and other network information
from your network administrator for your camera. A static IP address may
simplify access to your camera in the future.
Enter the fixed IP address in this field.
This number is used to determine if the destination is in the same subnet.
The default value is 255.255.255.0.
Enter the gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of transmissions to a
different subnet.
Enter the primary domain name server for translating domain names to IP
addresses.
Enter the secondary domain name server for translating domain names to
IP addresses.
LAN Settings
